PP melt blown filter media supplied in rolls for face-mask, air-purifier and composite filtration production.






PP melt-blown filter media is a fine-fiber polypropylene nonwoven supplied in roll form for further converting. Molten PP is drawn into microfibers and collected as a continuous web, producing a finer pore structure than conventional spunbond material. Selected grades can be used as the filtration layer in face masks, air-purifier filters and multilayer filtration media.
The listed reference grades compare efficiency, resistance and basis weight. The source data does not include the full test method, airflow or sample-conditioning details, so these conditions must be confirmed before the values are used as purchase criteria. Buyers should also specify roll dimensions, core and packaging. Any electret treatment, lamination or other secondary processing must be confirmed for the selected grade before it is included in an order.
The values below are reference data for the listed models. The source data does not state the complete test method or airflow condition. Confirm the test method, airflow or face velocity, sample condition and acceptance tolerance before ordering.
| Model | Resistance | 0.3 µm Efficiency | Basis Weight |
|---|---|---|---|
| PFE95 | ≤20 Pa | ≥80% | 25 ± 1 g/m² |
| PFE99 | ≤25 Pa | ≥95% | 25 ± 1 g/m² |
| Model | Resistance | 0.3 µm Efficiency | Basis Weight |
|---|---|---|---|
| H11 | ≤10 Pa | ≥95% | 20 ± 1 g/m² |
| H12 | ≤19 Pa | ≥99.5% | 20 ± 1 g/m² |
| H13 | ≤28 Pa | ≥99.97% | 30 ± 1 g/m² |
Provide the target efficiency, permitted pressure drop, test method, basis weight, width, roll length, core size, winding direction, treatment requirement and annual quantity. The approved order specification should state which properties are inspected, the sampling frequency, acceptance limits and required report format. Do not assume that a test or secondary process is included unless it appears in the confirmed quotation.
No. They are reference material-grade designations on this page. Finished-mask compliance depends on the complete product construction and the applicable certification test.
Send the usable width, maximum roll diameter, core specification and roll-length requirement. Availability must be confirmed for the selected grade.
State whether treatment is required together with the target efficiency, resistance, storage condition and validation method. Availability must be confirmed in the quotation.
Share the intended layer order, substrate and converting process. The compatible construction and processing scope must be confirmed before ordering.
Send the application, grade or target efficiency, pressure-drop limit, test method, basis weight, width, roll length, core, treatment, packaging and quantity.
Please send the target application, efficiency and resistance criteria, test method, basis weight, roll dimensions, core, treatment, packaging and order quantity. A current sample or specification sheet will help confirm the correct grade.